Solar inverter monitoring, around the clock
One app for every inverter
A Svitgrid gateway beside your inverter, on Wi-Fi or a serial cable, or your Home Assistant reads Deye, Sunsynk, Sol-Ark, Victron, SolaX, Anenji, Edecoa, Sofar, and LuxPower 24/7. Your phone shows it all from anywhere.
- 1,000+stations online
- —generating now
- —produced all-time
Your own power, under your control
You paid for the panels and the battery. Svitgrid helps you get the most from them.
Use your own solar first
See where every watt goes: solar, battery, home and grid. Schedule battery charging on supported inverters, and switch loads on when the sun is spare.
Know when the grid fails
A push notification when the grid goes down and when it comes back, and the app shows how long the battery will last. Telegram alerts work too.
Watch it from anywhere
Your inverter, battery and history on your phone, wherever you are. With Home Assistant, free local mode keeps the data at home.
What Svitgrid does for you
Find yourself below. Every answer is something the app already does.
Worried about the next power cut?
You put in a battery to keep the lights on. Svitgrid makes sure it lasts.
- A push notification when the grid goes down and when it comes back
- How long the battery lasts at the current load
- Switches off what can wait when the charge runs low
- Outage schedules too, for homes in Ukraine
Drive an electric car?
Charge the car from your roof, not from the grid.
- Charge from spare sun
- Charge at your night rate
- Pause during a power cut so the house keeps the battery
- A reminder to plug the car in
Want your home to follow the sun?
The water heater, heating and sockets switch on when the energy is free.
- Rules like “when this happens, do that” on battery, sun and temperature
- A Zigbee mesh of smart sockets across the house
- Heat water and rooms from spare sun
- Ready-made recipes to copy
Already run Home Assistant?
Keep what already works. Svitgrid connects to it.
- Home Assistant collects the data and controls the inverter
- Local mode keeps everything on your network
- Free on every plan
- Rules and schedules work through Home Assistant too
Building it yourself?
Spend your time on the house, not on a register map.
- Have your own ESP32-S3? Flash it from the browser for free
- First readings in minutes
- RS-485 and RS-232 straight into the inverter, wiring already proven
- The cloud, history and app are already built
- Board and module
- Register map
- Server and database
- Charts, an app
- Free firmware
- Models already mapped
- Cloud and history
- iOS/Android app
Looking after dozens of stations?
See a client’s problem before they call you.
- Every client station on one screen
- Access roles for clients and staff
- Every brand listed above in one app
- Remote diagnostics and a log of every change
More than monitoring
Control, optimize, and automate your solar system
Live solar from the Svitgrid fleet
Generating now · — · — inverters · — regions
All-time produced · —
Aggregated by region · no individual locations · ~1 h delayed · generation only · occupied territories excluded
All figures are aggregated by region (oblast) and drawn at each region's geographic centre — never at a real installation. We do not publish the location, address, or coordinates of any individual system. Data comes from voluntary Svitgrid users' distributed rooftop solar, is delayed by up to ~1 hour, and shows generation only — not grid status, consumption, outages, or any infrastructure. Temporarily occupied territories are excluded.
Always-on monitoring
A compact device that sits next to your inverter and reports data to the cloud 24/7 — even when your phone is off. Connects via WiFi, supports smart home devices via Zigbee.
- Plug-and-play setup via Bluetooth
- OTA updates
- Zigbee smart device control
- Works with all supported inverters
The gateway ships in Ukraine. Elsewhere, write to us on WhatsApp, or flash your own ESP32-S3 for free. The app needs a plan, from $2 a month.
Three ways to connect
Choose the setup that fits your needs
Direct Connection
Phone → Inverter via WiFi
- Download Svitgrid from App Store or Google Play
- Connect your phone to the inverter's WiFi
- Add your inverter model and data logger serial
- Start monitoring — data appears instantly
Best for: Quick setup, single household, on-site monitoring
Gateway Device
Always-on cloud monitoring
- Plug the gateway into power near your inverter
- Pair via Bluetooth using the Svitgrid app
- The gateway connects to your WiFi and inverter automatically
- Data streams to the cloud 24/7 — monitor from anywhere
Best for: Remote access, 24/7 data, smart devices, installers managing multiple sites
Home Assistant
Svitgrid add-on on your HA box
- Install the Svitgrid add-on from the add-on store
- Sign in with your Svitgrid account
- Point it at your inverter on the local network
- It collects 24/7 and can run your schedule locally
Best for: You already run Home Assistant and would rather not buy hardware
Simple, honest pricing
Cancel anytime.
In every plan
- Live energy monitoring
- Blackout and grid-restored alerts
- History and charts for consumption, generation and battery
- Day-ahead generation forecast
- Inverter schedules: battery charging, generator, battery hold
- Zigbee plug and relay control
- Tariffs and a report of what you saved
- Connect your way: a Svitgrid device, Home Assistant, or straight from the phone
| Basic$2/moor $20/year | Plus · most popular$5.99/moor $59.99/year | Pro$11.99/moor $119.99/year | |
|---|---|---|---|
| How much you can connect | |||
| Inverters | 1 | 3 | Unlimited |
| Homes | 1 | 3 | 5 |
| System size | up to 50 kW | up to 50 kW | Unlimited |
| Household sharing | not included | up to 5 people | up to 10 people |
| Automation | |||
| Day planner | not included | included | included |
| Forecast analytics: accuracy and lost generation | not included | included | included |
| Data refresh | every 60 s | every 30 s | every 30 s |
| Support | |||
| Priority support | not included | included | included |
Full features per subscription →
Basic, Plus and Pro are bought in the app. More than 5 households? Tell us about your fleet.
Prices are shown in USD; your store shows the price in your currency at checkout. Annual plans save about two months. There is no separate free tier, but a Svitgrid device never goes dark without one: live monitoring, manual inverter control and blackout alerts stay on permanently. History, forecast and automation stop.
Install solar? Let's work together
You put in the system; Svitgrid keeps an eye on it after you leave. See every client's station in one place and hear about a fault before the client calls you.
-
Every client in one list
A fleet view of every station you look after, with search, a map and reports on what each one produced.
-
Problems come to you
Alarms from every site in one feed, and a summary each evening of what the fleet produced and which stations went silent.
-
The station stays the client's
You invite the client by email and they accept. They keep ownership; you get to see the data. Your team joins as operators or viewers.
-
No caps on stations or seats
An Organization plan removes every limit on homes, inverters and people. The price depends on the size of your fleet, so we agree it directly.
Looking after many sites? Tell us how many, and we will talk about terms. How organisations work →
Tell us about your work
We reply within one working day.
Rather talk? Call +380 63 199 6906 or email hello@svitgrid.app.
Support that answers
Write to us on WhatsApp, in English, or join the Svitgrid Telegram group. In the group, write with the diagnostic code from the app: the bot looks at your station right away, and we read the same group.
The bot answers at once
With the code from the app it sees your station and answers from data: why readings stopped, why the battery is not charging, what exactly broke.
We read every message
The people who build Svitgrid are in the same group. An ordinary problem gets solved in the conversation, and a bug becomes a task.
Reports pay off
We value people who report problems. A confirmed bug earns points, and points pay for your subscription.
Ready to take control of your solar system?
Something not connecting? Write to us on WhatsApp or in the Telegram group, and we will help.
Get in touch
Questions, custom orders, or just to say hi — reach out directly.